2/20/2023 0 Comments Mac mojave 10.14.4 clover efi![]() In the screen that appears just press "q" and select to boot windows. After creating the DSDT Override (basically the dsdt-modified.aml file in the c:\dsdt folder) you need to use automate-eGPU-EFI.Ĭreate the USB Drive easily with script and then rename the "dsdt-modified.aml" file as "DSDT.aml" and put it into the bootable usb key used for automate-eGPU-EFI in this folder: \EFI\CLOVER\ACPI\WINDOWS.Īfter that, you can boot the Mac pressing the option key, and select "EFI Boot" in the boot manager, making sure it is the USB Drive with automate-eGPU-EFI. Creating a DSDT is pretty easy, if you carefully follow the guide, I used the Intel Method in Step 1. The basics for the eGPU to work.Īt this point we can proceed by doing a DSDT Override by following this guide. ![]() I haven't even installed them all, just the Cirrus, Broadcom, the Intel Chipset utility and the Intel ME. ![]() I had frequent BSODs, and the installation was basically unusuable, so I proceeded by installing manually the drivers from the bootcamp folder to keep track if some particular driver gave me the BSODs issue. Īfter having blocked the Intel HD 4000 drivers installation, we need to install the bootcamp drivers: here I had some issues in my initial experience, because after installing these drivers (keep in mind that you need to prevent the Intel HD graphics driver installation, that are integrated in the Bootcamp Drivers, I've just deleted them from the folder). You can follow this guide to prevent the drivers installation. We need to prevent the installation of the Intel HD 4000 graphics, since Windows 10 is going to automatically download the drivers and install them. Now we need to install the nvidia drivers provided into the bootcamp drivers folder (WindowsSupport).Īfter the installations of the nvidia drivers, reboot, and after the reboot in device manager, under the graphics cards section you should see the GT 650m and a Microsoft Basic Display adapter, this is the configuration that we need to keep in order to get everything working. Now the most important step: select the "EFI Boot" entry and not the "Windows" one, so that Windows will be installed in UEFI mode.Īfter the installations DO NOT connect the Mac to a network, just skip through the setup and get to the Desktop. After having created the Windows 10 USB drive and the partition, plug the usb drive into the Mac, and power the machine up while pressing the options/alt key. Make sure to get the bootcamp drivers too from Bootcamp Assistant. It needs to be used to create the Windows 10 bootable media, but the partition must be done via Disk Utility:Ĭreate a partition on the MacBooks SSD (pay attention that if you are using APFS you need to partition the drive and not create a volume inside the apfs container) and format it in HFS . Windows 10 can be installed on a mid-2012 MacBook Pro without making the partition with Bootcamp Assistant. I don't think I would have been able to get Windows 10 to work.įirst of all Windows 10 MUST be installed in UEFI mode, since the RX 580 can't boot in BIOS boot mode (it displays a black screen and doesn't output anything). ![]() The setup on Windows 10 was much more complicated, in fact if it wasn't for this guide.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |